1. Speaker Components Deals
  2. sku: 5338027903252351
  3. POLY GW-5028

POLY GW-5028 Cone Woofer Rubber Edge Watts

Gw-5028 Unbranded Poly Cone Woofer Rubber Edge Watts Ohms Closeout

( Brand: Poly ), ( Manufacturer Part Number: GW-5028 ), ( Type: Woofer )

Review POLY Cone Woofer Rubber Edge 100 Watts Ohms Closeout

The GW-5028 Poly Cone Woofer with Rubber Edge is a high-quality audio component designed for delivering powerful and rich bass sounds. This woofer features a 12-inch poly cone, which is known for its durability and ability to handle high power levels without distortion. The cone is surrounded by a rubber edge that provides additional protection and ensures a tight seal with the speaker basket, resulting in improved sound quality and reduced sound leakage.

The woofer's voice coil is made of copper, which allows it to handle high power levels and heat without losing its performance. The voice coil is also wound with high-quality wire to minimize distortion and ensure accurate sound reproduction. The woofer is compatible with a wide range of amplifier power levels, with a maximum power handling capacity of 500 watts.

The GW-5028 Poly Cone Woofer with Rubber Edge is designed for use in a variety of applications, including home theater systems, car audio systems, and professional sound systems. Its rugged construction and high power handling capacity make it suitable for use in demanding environments. The woofer's black finish and sturdy mounting hardware make it a stylish and reliable addition to any audio system.

In summary, the GW-5028 Poly Cone Woofer with Rubber Edge is a high-quality and durable audio component that is designed to deliver powerful and accurate bass sounds. Its 12-inch poly cone, rubber edge, copper voice coil, and high-quality wire winding ensure reliable performance in a wide range of applications. With its rugged construction and stylish black finish, this woofer is a great choice for anyone looking to upgrade their audio system.

Pros of GW-5028 Poly Cone Woofer with Rubber Edge:

1. High Power Handling: This woofer can handle high power, making it suitable for loud, high-impact music.

2. Durable Construction: The rubber edge around the woofer cone provides protection against damage, ensuring its longevity.

3. Good Bass Response: The poly cone material is known for its ability to produce deep, rich bass sounds.

4. Versatile Usage: The GW-5028 woofer can be used in various audio systems, including home theaters, car audio systems, and PA systems.

Cons of GW-5028 Poly Cone Woofer with Rubber Edge:

1. Potential for Overpowering Midrange: High-power woofers can sometimes overpower the midrange frequencies, leading to an unbalanced sound.

2. Requires Proper Installation: Improper installation of the woofer can lead to sound distortion or damage to the woofer.

3. Cost: High-power woofers like the GW-5028 can be expensive, which may not fit within everyone's budget.

Conclusion:

The GW-5028 Poly Cone Woofer with Rubber Edge is a high-quality, durable woofer that can produce deep bass sounds. Its high power handling makes it a good choice for those who enjoy loud music. However, its cost and potential for overpowering midrange frequencies are drawbacks that should be considered. If you have a budget for a high-power woofer and can ensure proper installation, this woofer could be a good fit for your audio needs.

Recommendation:

If you're in the market for a high-power woofer and can afford the cost, the GW-5028 Poly Cone Woofer with Rubber Edge is a solid choice. Make sure to properly install it to avoid any potential issues with sound distortion or damage to the woofer. If the cost is prohibitive, consider looking at other options with similar specifications but at a lower price point.

Details:

My Erwin-Vega APOS are up and running again. It was also very helpful to see how slowly the adhesive sets up, and keep turning speaker pressing foam into place until holds.

Q: does simply speakers offer combined shipping. A: yes we do. If your recon kit shims do not fit you can cut them into strips and insert several of the evenly around magnet. Thanks again for a most pleasant experience.

It turned out to be ordinary contact cement that had no work time. Illustrating these techniques, beyond your providing the foams and adhesive, made a huge difference.

Although I think could have centered the foam better on cone as you advised, everything worked out. My father in law gave me his marinates way speaker boxes.

Great service and speedy in delivery. Just wanted to thank the entire staff for a great job on my Snell Wii 8 woofer.

This kit seemed too easy.

Every step of the process, from initial communication to return shipping, was superbly handled, and quality workmanship on surrounds is sublime. Having done this a number of times the old way shims, dust caps, etc. I can APOS imagine ever replacing surrounds the old way again.

You all made the process as painless possible and I actually enjoyed doing it myself.

Re-installing the woofer was a 5 minute process and sound great. But I persevered, and am a 75 year old woman who loves to listen organ live from iTunes. Thanks again for your great service and keep up the work.

They fit perfectly, and would you believe the glue provided lasted until I finished second speaker. Are solid, guys an example of how something should be done. It is absolutely amazing you guys have replacements for speakers built in the 80 APOS like these.

If you glue it, own it. Getting the old glue off was hardest part of job and most consuming.

If the horn is still defective feel free to make arrangements return item for inspection and receive a replacement diaphragm. Q: I just finished replacing my diaphragm and the horn still does not work.

I installed the new radiators today and they are just fine. My bass is back to where it should be on these great speakers originally purchase in our team eager find you correct size needed arrange for an exchange. Do not glue anything if you are unsure of the fit or sizing. I ordered a new set of passive radiators for my ESS hail amt1-a speakers on Nov 6.

Most orders ship same day. By that time I had found simply speakers, read about your glue, and ordered a tube. What happened. A: it is normal that two foam edges have shipped and are simply stuck together. No more sound only in the front, now I can enjoy whole bl experience.

I must say wish had ordered the kit from you guys to begin with.

Can simply speakers help. You can also substitute our shim stock with thinner material such as business cards or other sturdy pieces of clean paper cut into strips. I ordered them from orange county speakers in ca.

After getting them I put the replacements in as instructed, being an engineer was a bit skeptical this would work. Again, my sincere thanks.

The instructions were spot on and answered all my questions. Xa0 speakers and parts showing signs of MI's-use, overpowering, under powering distorted, malfunctioning amplifiers, or improper crossovers will not be covered under warranty.

Units showing signs of use, IE. This is just a note of thanks. Q: I ordered a speaker foam repair kit, but am not sure if it fits my. Shipping was super fast and service first rate.

I will order any future speaker kits and supplies from simply speakers. Thanks again. See our FAQ page for other.

See attached photo.

Best wishes.

A: measure your speaker cone frame diameter and then with those measurements before you. This would cause the system not to send a signal horn. These speakers are 43 years old and now good as new again.

In this day and age when very few things even meet expectations, to have them so profoundly exceeded is a real treat. I found you guys and ordered a set. The video instructions have been unusually helpful, especially hints to apply adhesive back side of foam before turning it over and attaching cone.

It was, and the result is excellent. I talked to your tech guy first and he was a big help in helping decide what get. Q: I have a Jul audio sub woofer, and do not know my model.

The width of material is always 60 inches 5 feet. With your glue I was able to finish installing the surrounds just as video describes. Xa0 ask all questions before placing an order.

I now have a fully functional 2002 Toyota Avalon sub woofer. The amount of time and work saved over doing it old way, makes a bargain. The instructions and YouTube video made things very easy to follow.

You beat which usually takes longer. Keep up the great work.

Much too aggressive and almost cost me my speakers.

They assured their glue was the best and easy to work with. Xa0 SS audio speaker foam edge repair kits, diaphragms and other qualified items shown in our listings ship to the USA for free.

I went to repaint the boxes and foam just fell off.

Some items xa0 may not quality for free shipping. I utilized the YouTube video to take me step-by-step through process.

Just wanted you to know after purchasing and installing foam for the sub of my paradigm system, speakers sound great again.

Special order items are not returnable. Just wanted to drop a quick note let you know how pleased I am with the new surrounds recently installed on woofers for talkiest dq6ci pair that i. M restoring. They were shipped on Nov 7 and I received them 9. Shipping charges will appear for those items.

What went wrong. A: you might have a blown fuse, bulb, or defective crossover component. I reformed my 8 woofers from 1985 and the sound is fantastic. Try to peel the two edges apart.

Speakers or parts xa0 with burnt voice coils, blistered torn cones, spiders, other signs of abuse, amplifier malfunction, crossover MI's-use will not be covered under warranty. Q: what can I do if my shims not fit inside the magnet of speaker am reckoning. A: model's vary.

part #: gw5028 prices

  • $26.99-$59.00

specifications speakerpartgo:

  • brand: Poly
  • mpn: Gw-5028
  • type: Woofer

General speakerpartgo:

  • in stock: Yes
  • Speaker Parts Components > Speaker Building Components
  • condition: New

Payments speakerpartgo:

  • Discover
  • AmEx
  • PayPal
  • VisaMC

Offer speakerpartgo:

  • Started: November 8, 2018, 3:27 pm
  • Sold: 0
  • best offer: false
  • bids: 0
  • quantity: 9

Ratings:

  1. very pleased 11-08-18
  2. Very Good Seller 11-08-18
  3. ExcellentFastItem arrived in fine shape. A 11-08-18
  4. Perfectly packaged! Exactly as described. Thanks!!! 11-08-18
  5. Super fast delivery, thanks 11-08-18

Seller speakerpartgo:

  • rating 11-08-18: 99.9%
  • city: Saint Petersburg, Florida
  • zipcode: 33713
  • # feedbacks 11-08-18: 39002

Shipping speakerpartgo:

  • type: Calculated
  • handling: days

Returns speakerpartgo:

  • policy: no returns
type: woofer,
category: electronics > speaker parts components > speaker building components, sku: 5338027903252351,
Review#1 very pleased ()
Review#2 Very Good Seller ()
Review#3 ExcellentFastItem arrived in fine shape. A ()
Review#4 Perfectly packaged! Exactly as described. Thanks!!! ()
Review#5 Super fast delivery, thanks ()
Poly GW-5028 Is Similar To:
speakerpartgo logo
5 offers $26.99–$59.00 USD
  • New. Offer #1 priced at $26.99 + $0.00 shipping estimate = $26.99* total. 12 Goldwood Sound GW-4028/S Shielded 4" Woofers 70 Watt each 8ohm Speakers. 1 Goldwood Sound /S Shielded 5.25" Woofer.FREE SHIPPING
  • New. Offer #2 priced at $31.93 + $0.00 shipping estimate = $31.93* total. Talent VB1 Folding Portable Vocal Booth Stahl Tools SSVT Variable Temperature Soldering Station 374-100.FREE SHIPPING
  • New. Offer #3 priced at $59.00 + $0.00 shipping estimate = $59.00* total. BOX SIZE (MODELED WITH BASS BOX USING HIGH FIDELITY SETTINGS). Up for sale is (2) 5-3/8" woofers.FREE SHIPPING
  • New. Offer #4 priced at $38.00 + $0.00 shipping estimate = $38.00* total. Surface Area of Cone (Sd) 83.65 cm Up for sale is (1) 5 3/8" woofer.FREE SHIPPING
  • New. Offer #5 priced at $40.25 + $9.00 shipping estimate = $49.25* total. 1 Goldwood Sound /S shielded 5.25" woofer, 70 watts RMS and 130 watts Max, 62 - 9,000Hz frequency response, 85dB SPL, 8ohm.+$9.00 shipping

Copyright © speakerpartgo.com